:  Feb 16, 2007



. Remove the floor console.

. Move the front seats fully backwards.

. Remove the audio unit.

. Remove the climate control assembly.
  Disconnect the 4 electrical connectors.




. Remove the instrument panel console switch pack.
  Remove the 2 Torx screws.
  Disconnect the electrical connector.




. Remove the cigar lighter assembly.
  Remove the 2 Torx screws.
  Release the 3 clips.
  Disconnect the 3 electrical connectors.




. Remove the driver side closing trim panel.
  Release the clip.
  Remove the 2 screws.
  Disconnect the electrical connector.




. Remove the passenger side closing trim panel.
  Release the clip.
  Remove the 2 screws.
  Disconnect the electrical connector.




. Remove the instrument panel center reinforcement 2 side Torx screws.



.
  : Cover fiber optic cable connectors to minimize dust ingress and avoid bending the cables in a radius of less than 30 mm.

Remove the navigation system display module.
  Remove the 4 Torx screws.
  Disconnect the fibre optic connector.
  Disconnect the 2 electrical connectors.




. Release the heater duct.
  Remove the 3 clips.




. Release the LH wiring harness from the instrument panel center reinforcement.
  Release the clip.

. Release the RH wiring harness from the instrument panel center reinforcement.
  Release the clip.




. Remove the instrument panel center reinforcement.
  Remove the 8 Torx screws.
  Release the 4 clips.




. Install the instrument panel center reinforcement.
  Secure the clips.
  Tighten the Torx screws.

. Secure the wiring harnesses.
  Secure with the clips.

. Attach the heater duct.
  Install the clips.

. Install the navigation system display module.
  Connect the electrical connectors.
  Connect the fibre optic connector.
  Tighten the Torx screws.

. Install the passenger side closing trim panel.
  Connect the electrical connector.
  Secure the clip.
  Tighten the screws.

. Install the driver side closing trim panel.
  Connect the electrical connector.
  Secure the clip.
  Tighten the screws.

. Install the cigar lighter assembly.
  Tighten the screws.
  Connect the electrical connectors.
  Secure with the clips.

. Install the instrument panel console switch assembly.
  Connect the electrical connector.
  Tighten the Torx screws.

. Install the climate control assembly.
  Connect the electrical connectors.

. Install the audio unit.

. Move the front seats fully forwards.

. Install the floor console.